This is must, if you use stock rods in a competition or hot street engine. These bolts can be used as a replacement or you may send your old rods to us. We will rebuild your old rods and install the competition rod bolts. The rod will be remachined on the big eng, rebushed, cleaned and checked for alignment.

		Price
C-41297-T	Stock Rebuilt Rod	$97.60
C-41297-TJP	Competition Rebuilt Rod (Balanced Set)*	$77.14
C-32344-T	Competition Rod Bolt & Nut; 6cyl, (12 req.)*	$8.45
* Torque to 55 ft lbs. with 30 wt. oil.

Chrome Moly Cylinder Studs For Street or Competition

			Price
XKE 3.8 61-64	Stud Length 61/2" long (14 req)	C-23610-TJP	$16.63
XKE 4.2 65-68	Stud Length 61/2" long (10 req)	C-23610-TJP	$16.63
	Stud Length 67/8" long (4 req)	C-23609-TJP	$16.42
XKE 4.2 & 68-up XJ-6 Series I	Stud Length 61/2" long (4 req)	C-23610-TJP	$16.63
	Stud Length 13" long (4 req)	C-38073-TJP	$20.28
	Stud Length 121/2" long (6 req)	C-29033-TJP	$19.87
XJ-6 Series II & III	Stud Length 121/2" long (7 req)	C-29033-TJP	$19.87
	Stud Length 61/2" long (3 req)	C-23610-TJP	$16.63
	Stud Length 13" long (3 req)	C-38073-TJP	$20.28
	Stud Length 67/8" (1 req)	C-23609-TJP	$16.42
V-12 (in water jacket only)	Stud Length 73/4" long (4 req)	NAB-2646-AA	$14.92
	Stud Length 81/2" long (10 req)	C-32534	$9.11
Note: These studs should be Torques to 70 ft lbs with 30wt oil.

Main Bearing Stud Kit     3.8 & 4.2
Studs	(14 req.)*	TJP-200	MAIN BRG.STUDS 3.75 3.75 LONG 1/2X20 BOTH ENDS	$7.21
Nuts	(14 req.)	TJP-201	MAIN BRG. NUTS 1/2 X 20	$1.62
Washers	(14 req.)	TJP-202	MAIN BRG. WASHER	$1.62
* Torque to 130 ft.lbs. with 30 wt oil.

Competition Head Nuts
Competition Nuts	C-2328-TJP	$1.83
12 point Nuts	C-2328-TJP-12	$3.05
Competition Washers	C-2323-TJP	$1.88