SBA (Short Block Assembly)

includes block, crankshaft, rods and pistons, timing gear with cover and oil pump.

CEA (Complete Engine Assembly)

includes short block assembly plus oil pan and complete cylinder head (see head description)

V-12 CEA (V-12 Complete Engine Assembly)

includes short block assembly plus oil pan and complete cylinder head (see head description)

All rebuilt units carry a 12 month warranty for repair or replacement of unit only.  See warranty statement.

Let Us Bench Test or Run-In Your Complete Engine Assembly.

Ask about this additional service when ordering your Terri-Tuff Engine

Terri™Tuff ReBuilt Heads {Customer Head or Exchange Unit}

CH / All 6 cyl. Heads except F.I. XJ-6.

FICH / All XJ-6 F.I. Cylinder Heads

V-12 CH-80 / All V-12 to 1980

V-12 CH-HE / All V-12 1981-up

Cylinder heads are stripped, cleaned, inspected, surfaced as necessary and painted the correct engine color. New cam bearings are installed while bronze silicon valve guides, and teflon seals are fitted with new intake and exhaust valves, springs and keepers. Your camshafts are installed and adjusted to correct clearances. Late model heads are fitted with exhaust tappet hold down kits. Worn tappets, tappet guides and valve seats are replaced as needed at an extra charge.

THE "CAT CLAW"® HEAD... For Super Street or Racing Competition GAIN OVER 100 HORSEPOWER WITH NO OTHER MODIFICATIONS TO YOUR ENGINE

The Hemispherical Head is fitted with camshafts to match your application, vehicle weight and transmission type, oversize valves, ported, polished, bench flowed, and fitted with compression control o-rings.

THE "CAT CLAW" HEAD IS COMPLETE AND READY TO INSTALL.