|
Competition Machine
Shop Services
For Racing & High
Performance
1. Complete Race Heads / Complete Race
Engines
2. Complete Balance - Crank - Rods -
Pistons
3. Cylinder Head Porting / Intake
Porting
4. Cylinder Head O-ring (a Must for
Compression Ratios over 11:1)
5. Cylinder Head & Block Dowel Pinning
(for Absolute Alignment)
6. Competition Valve Job (Serdi HP) 10
angles on seat - 2 angles on valve. We also build heads w/ 1.75 - 1.875
- 1.910 - 2" Intake Valves
7. Oversize Competition Tappets
8. Complete Dry Sump System
9. Boring and Honing of Cylinders
w/Torque Plate Attached
10. Rebuild Carrillo, Crower & Jaguar
Connecting Rods
11. Custom Header Building
12. Complete Dyno Service - Tuning -
Break-in
13. Competition Front & Rear Hubs w/
1/2" x 3" studs
14. Custom Bell Housings for Jerico,
Borg Warner, T-10 & Muncie Transmissions
|
