|
Solenoid Bypass instructions: |
|
| Many of you own cars that came with an external solenoid for use when starting the car. It is usually mounted on the firewall or on the side of the engine bay. The use of this solenoid may still be retained by following these easy instructions: |  |
 |
The nippondenso has two electrical terminals on it. This starter may be used in both positive and
negative ground cars so, I will refer to the terminals as the "big" terminal and the "little" terminal so as
not to confuse you. The big terminal has the nut on it while the little
terminal( solenoid terminal) has a shielded black cover over a small male
(spade) push terminal. With a 4 inch piece of wire(14 or 16 gauge will do) connect these two terminals together. To do this you will need to buy a female connector
to crimp on one end of the wire (goes to the small terminal) and a ring connector for the large terminal.
That is all there is to it! If this just confused you, please give us a call or drop us an email. We'll be happy to assist you.
|
| If you would like to buy this small wire ready to go from us. We will be glad to make you one. Cut, crimped, and ready to go for $6.95 | |